English - 4
If the reception is clear, you do
not have to fine-tune the
channel, as this is done
automatically during the search
and store operation. If however
the signal is weak or distorted,
you may have to fine-tune the
channel manually.
◆
Tune:
You can obtain a sharp and clear picture and
good sound quality.
◆
Store:
You can memorise adjusted picture or sound.
◆
Erase:
You can erase adjusted picture or sound.
Channel - Fine Tune
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to skip
are not displayed. All of the
channels that you did not
specifically choose to skip are displayed during scanning.
Select
Added
or
Erased
by pressing the
œ
or
√
button
repeatedly.
Channel - Add/Erase
Channel - Manual Store
(depending on the model)
You can store channels,
including those received via
cable networks. When storing
channels manually, you can
choose:
- Whether or not to store each
of the channels found
- The programme number of each stored channel which
you wish to identify
◆
Color System:
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
➢
NTSC4.43
is a ‘trick’ playback mode used by
special VCR’s to play PAL-recorded videos in NTSC
mode.
◆
Sound System: B/G,I,D/K,M
◆
Search
(When you do not know the channel numbers)
:
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆
Prog.No.
(Programme number to be assigned to a
channel)
◆
Store
(When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel
Manual Store
Color System
: AUTO
Sound System
: B/G
Search
: -/+
Prog.No.
: 18
Store
: ?
Select
Adjust
Exit
Channel
Add/Erase
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
Select
Adjust
Exit
Channel
Fine Tune
Tune
: -/+
Store
:
?
Erase
:
?
Select
Adjust
Exit
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆
From:
Channel number to
be changed.
◆
To:
New channel number to be identified.
◆
Store:
Confirmation the exchange of channel numbers.
Channel - Sort
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
➢
To stop the search before it
has finished, press the
MENU
button.
When finished, the
Sort
menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to “Channel - Sort”. To exit without
sorting, press the
MENU
button.
Channel - Auto Store
Channel
Auto Store
√
√
Manual Store
√
√
Add/Erase
√
√
Fine Tune
√
√
Sort
√
√
Select
Enter
Exit
P 1
471 MHz
48
%
Exit
Channel
Sort
From
: P 1
To
: P--
Store
:
?
Select
Adjust
Exit
AA68-03808E-01Eng_Ma 8/16/06 11:20 AM Page 4
