English - 6
Pressing
TOOLS
button to enter
Dual l-ll
/controls the
processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either
“Dual-I ” or “Stereo”, depending on the current transmission.
Selecting the Sound Mode
(depending on the model)
➢
◆
If the receiving conditions deteriorate, listening will
be easier if the mode is set to the
Mono
.
◆
If the stereo signal is weak and an automatic
switching occurs, then switch to the
Mono
.
◆
When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the
DUAL I-II
button.
◆
NICAM Stereo
Type of broadcast
Mono
(Normal use)
Dual-I
NICAM
Dual-II
NICAM
Mono
(Normal)
↔
↔
R
NICAM Mono
Regular broadcast
(Standard audio)
NICAM Dual-I/II
On-screen indication
Mono
NICAM
Mono
(Normal)
↔
NICAM Stereo
Stereo
NICAM
Mono
(Normal)
↔
◆
A2 Stereo
Type of broadcast
Mono
(Normal)
Bilingual or Dual-I/II
Regular broadcast
(Standard audio)
On-screen indication
Dual-I
↔
Dual-II
Stereo
Stereo
Mono
(Forced mono)
↔
Use to quickly select frequently
used functions.
➢
You can press
TOOLS
button and check the
Sleep Timer
/
Picture
Mode
/
Sound Mode
/
Dual
I-II
/
Turbo Plus
/
Sound Adjust
by
<
/
>
button.
The detail information please refer to page2
TOOLS
(depending on the model)
Tools
Move
Adjust
Exit
Sleep Timer
◄ Off
►
Picture Mode
◄ Dynamic ►
Sound Mode
◄ Standard ►
Dual I-II
◄ Mono
►
Turbo Plus
◄ Off
►
Sound Adjust
Sound -
(depending on the model)
Mode / Adjust / Auto Volume / Turbo Plus
Mode
:
Standard
/
Music
/
Movie
/
Speech
/
Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
➢
You can select these
options by pressing
TOOLS
button to enter
Sound Mode
.
Adjust
:
Bass
/
Treble
/
Balance
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to
Custom
.
Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
➢
You can select the options by pressing
TOOLS
button
to enter
Turbo Plus
.
Move
Enter
Exit
Sound
TV
Mode
: Standard ►
Adjust
►
Auto Volume
: Off ►
Turbo Plus
: Off ►
AA68-04048J-Eng.indd 6
2009-12-07 �� 6:29:49