English - 1
Connection Panel
(depending on the model)
Rear Panel
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
➢
The actual configuration of your TV may be different,
depending on your model.
Control Panel
(depending on the model)
You can use the
3
buttons to switch the TV on when it is
in standby mode.
The
2
and
3
buttons also have the same function as
the ◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1
On-screen menu display
2
Volume adjustment
3
Channel selection
4
Remote control sensor
5
Standby indicator
6
Power on/off
AA68-04048J-00
AA68-04048J
➢
The actual configuration of your TV may be different,
depending on your model.
Connecting to the RCA Input
The RCA
3
and RCA
4
connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video
game device, or video disc player. (When using the mono
equipment, connect to the
AUDIO-L
input connector.)
The RCA
5
connectors are used for equipment such as a
DVD with component output.
cable television
network
or
cable television
network
or
COLOR TELEVISION
CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57
CS29Z58 / CS29A730 / CS29A760 /
CS29A750 / CS29B850 / CS29U50 /
CS29U57
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the
1
(75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA
2
connectors are used for equipment, such as a
recording VCR or audio system.
☛
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The
2
(
AUDIO
-
L
/
R
) and
1
(
VIDEO
) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
➢
When both the front (or side) AV and rear connectors (AV
IN2) are connected to external equipment, the front (or
side) AV receives priority.
1
Video input
2
Audio input
Front (or Side) Panel
OUT
VIDEO
IN 2
IN 1
Y
P
B
P
R
AA68-04048J-Eng.indd 1
2009-12-07 �� 6:29:47