30 _
Selecting and loading print media
5.
Close the paper cover.
6.
Slide the tray back into the machine until it clicks.
7.
After loading papdm_531
8.
er, set the paper type and size for the tray. See "Setting the paper size
LOADING PAPER
Loading paper in the tray
Load the print media you use for the majority of your print jobs in the tray.
The tray can hold a maximum of 150 sheets of 75 g/m
2
(20 lb bond) plain
paper.
1.
Pull the tray out of the machine. Open the paper cover and remove
paper from the tray if necessary.
2.
Load paper into the tray with the side you want to print facing up and
close the paper cover.
3.
After loading paper, set the paper type and size for the tray. See "Setting
the paper size and type" on page 31.
If you adjusted the tray itself to use paper shorter than 222mm (8.74
inches), you may not see the tray from outside of the machine,
double-check the tray is installed.
•
If you experience problems with paper feed, place one sheet at a
time in the tray.
•
You can load previously printed paper. The printed side should be
facing up with an uncurled edge at the rear. If you experience
problems with paper feed, turn the paper around. Note that print
quality is not guaranteed.
