S
AMSUNG
W
IRELESS
R
OUTER
U
SER
M
ANUAL
P
AGE
72
IP
V
6 F
IREWALL
On this page the user can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used
to allow or deny traffic from passing through the device. It works in the same way as IP Filters with additional settings. You
can create more detailed rules for the device.
In the IPv6 Firewall rules section the user can create, enable and disable IPv6 firewall rules used by this device.
The following parameters can be configured:
Configure IPv6 Filtering:
This option defines the behaviour of all the IPv6 firewall rules created. Option to choose
from are ‘
Turn IPv6 Filtering OFF
’, ‘
Turn IPv6 Filtering ON and ALLOW rules
listed
’, and ‘
Turn IPv6 Filtering ON and DENY rules listed
’. Select the appropriate
option used here.
Checkbox:
Tick this option to used the firewall rules created.
Name:
Enter a custom firewall rule name here. This name is used for identification.
Source Interface:
Select the appropriate source interface used here.
Destination Interface:
Select the appropriate destination interface used here.
Schedule:
Select a time schedule that will be applied to this rules here.
IP Address Range:
Enter the IPv6 address range used here.
Protocol:
Select the protocol used for this rule here. Options to choose from are
ALL
,
TCP
,
UDP
,
and
ICMP
.
Port Range:
Enter the port range used for this rule here.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
DRAFT, not Final
