Installation
21!,,/+&10
NOTE
• RLA is based on AHRI 210/240 cooling standard
ʀͱ͝ʒ̈ϩ̈ͱ͝ࣄÃ͝ʒͱͱθϩʪ͔ΧࢋࡠߣߧࢋߨইAࢥߩߡই࣍U9࣎ࢥߢߪࢋߥߧईইAࢥ
ߧߨईই࣍Ǯ9࣎ࡡĮЇϩʒͱͱθϩʪ͔ΧࢋࡠߤߦইAࢥߪߦই࣍U9࣎ࣅ
•
Ǥͱ̷ϩɇ˝ʪϩͱ̷ʪθɇ͝ʀʪ̈ϑॠߢߡईज़ࢋ
•
đɇӱ
*
Ї͔ɇ̷̷ͱиɇɵ̷ʪЭͱ̷ϩɇ˝ʪɵʪϩиʪʪ͝Χ˵ɇϑʪϑ̈ϑߣईज़ࢋ
•
Symbols
– RLA: Rated Load Ampere (A)
– MOC: Maximum Operating Current (A)
– MCA: Min
&
mum Circuit Ampere (A)
– MOP: Maximum Overcurrent Protective Device (A)
• Voltage range
– Units are suitable for use on electrical systems
where voltage supplied to unit terminal is not
below or above listed range limits.
• Maximum allowable voltage variation between phases
is 2%.
• Wire size & type must comply with the applicable local
and national code.
– Wire size: Based on the value of MCA.
– Wire type:
9U
phase: 60245 IEC57(IEC) or H05RN-F(CENELEC)
grade or more
Silence mode controller wiring diagram with
External controller
•
88AM89:M89@
2Pin
(RED)
4Pin
(RED)
Non-voltage contact
External controller
•
8:<M8;8M8;>M8<:M8<@
2Pin (RED)
4Pin(RED)
Non-voltage
contact
External controller