English - 23
03
O
VEN USE
PROGRAMMING AIR FILTER CLEAN TIME
When the air filter check indicator (FILTER) appears in the display window after a certain
time of use, you should clean the air filter according to the instructions “Cleaning the
Air Filter” on page 24 in this booklet. Then follow the procedure as below if you want to
change the air filter clean time.
1.
Hold down
CANCEL
and then press
NUMBER 3
button.
Hold together for 2 seconds.
Result :
The display will show the length of time in
hours between cleaning the air filter you have
programmed in or the original time preset by the
manufacturer.
2.
Press
NUMBER
buttons to set the desired clean time.
3.
Hold down
CANCEL
and then press
NUMBER 3
button.
Hold together for 2 seconds in order to save the new value.
This completes the programming of the air filter clean time.
4.
Press the
START
button for set the clean time.
Default clean time is 500 hours in terms of pure oscillating time, not the continuity
time.
You can set up to 999 hours.
After the clean time has expired, you should clean the air filter. See page 24.
HIDDEN KEYS
Note: Press Key 1 and then the next one. Hold for 2 secs.
Feature
Key Entry
Display
Remark
Key 1
Next
Continuity
time total
CANCEL
( )
1
Hold together for
2 sec.
Unit: 10 hrs.
Magnetron
oscillating
time total
CANCEL
( )
2
Hold together for
2 sec.
Unit: 1 hr.
Number
of times
of use by
memory
program
code
CANCEL
( )
START
Hold together for
2 sec.
Code No.
(Data display after
2 sec.)
739 times of use
(New code can be set
after data display)
CANCEL
( )
(Mode cancel)
Heating
time per
memory
program
code
(Automatic
sequential
display)
CANCEL
( )
PROGRAM
( )
Hold together for
2 sec.
(Sequentially
displays for 3 sec
from 1 to 30)
CANCEL
( )
(Mode cancel)
CM1929B_XEU_DE68-04030D-02_EN.indd 23
2017-07-03 8:13:44
