GB
9
How to Operate Memory Cooking
After having finished memory programming, just press the NUMBER
pad of the memory number you want to select. The oven will
automatically start heating according to the pre-programmed cooking
time and power level after a short delay (5 sec).
Double Quantity Pad Programming
✉
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose
setting might result in excess of the maximum time allowed for each
power level, the oven does not operate exceeding the maximum time.
1.
Make sure the oven is plugged into a properly earthed
electrical outlet and “ON” appears in the display window.
2.
Open the door.
The oven lamp will be turned on.
3.
Put the food into a suitable container, place it in the
centre of the oven and then close the door securely.
Result :
The oven lamp will go off.
4.
Press
NUMBER
pad.
Result :
After 2 seconds, the selected memory
program automatically starts heating.
1.
Hold down
and then press
pad. Hold together
for 2 seconds.
2.
Select desired program code by using
NUMBER
pads.
3.
Press
NUMBER
pads to set the magnification factor
within the range from 1.00 to 9.99.
✉
Default factor is 1.65 preset from the
manufacturer for increasing the cooking time.
Make sure that you set a correct factor between
1.00 and 9.99 for each memory code number.
4.
Press
button.
jtX_Y`X[Y`TWX[X^hniUGGwG`GG{ SGhGXWSGYWW[GG_aZ_Gwt
Summary of Contents for CM1429
Page 21: ...GB 21 Memo jtX_Y X Y TWX X h niU GGw GYXGG SGh GXWSGYWW GG_aZ_Gwt ...
Page 22: ...GB 22 Memo jtX_Y X Y TWX X h niU GGw GYYGG SGh GXWSGYWW GG_aZ_Gwt ...
Page 23: ...GB 23 Memo jtX_Y X Y TWX X h niU GGw GYZGG SGh GXWSGYWW GG_aZ_Gwt ...
Page 24: ...Printed in Malaysia jtX_Y X Y TWX X h niU GGw GY GG SGh GXWSGYWW GG_aZ_Gwt ...
