Samsung CM1019, Owner'S Instructions Manual

Page: 10 / 24

Cooking/Reheating
10
GB
1
Make sure the oven is plugged into a properly earthed electrical outlet and
“ON” appears in the display window.
2
Open the door.
The oven lamp will be turned on.
3
Put the food into a suitable container, place it in the center of the oven and then
close the door securely.
Result:
The oven lamp will go off.
4
Select the desired power level by rotating the COOKING POWER CONTROL
DIAL.
Result:
The selected power level will be displayed in the display window.
5
Set the desired heating time by rotating the TIMER DIAL.
Result:
“ON” blinks and the selected time is displayed in the display
window.
6
Press pad:
Result:
The oven lamp and cooling fan will be turned on.
Heating will start.
The time on digital display will count down.
7
When all time is elapsed, the end of cycle Beep Tone will sound 4 times and
all heating will stop. The oven lamp will go off. For 1 min, the display shows
“
” and the cooling fan will keep working in order to cool down the interior
parts. During the time, the fan will not stop even when you open the door. 1
min later it will stop and “ON” appears again. Food may be removed from oven
whilst the fan is still running.
8
Open the door and take the food out.
9
Close the door. The oven lamp will go off.
➢
Whilst heating, one press on pad stops the oven. You can
restart it by pressing the pad or a second press on pad
will cancel the selected program. When it is NOT in a heating
cycle, one tap on
pad cancels the selected program.
You can set the power level first and then the cooking time
next, or vice versa.
You can press +30sec button one or more times in order to
add the cooking time by 30 seconds.
➢
When in a heating cycle, you can not change the
power level or heating time. But you can add 30
sec increments using the +30sec pad. The dial
may be rotated but this does not affect the
current operation and the display remains the
same. It becomes effective next time you set the
oven manually after you finish the current
heating. If you want to change the current setting,
firstly stop the heating by using CANCEL pad and
set desired power level and cooking time again.
But when you are NOT in a heating cycle, you
can change the power level and heating time.
Changed values are promptly shown in the
display.
➢
The oven is designed not to work when power
level is set to “0” mode between the heating
mode and the defrosting mode.
➢
When you first plug in the power cord, the oven
beeps once and all the indicators show for 5 sec
in the display window.
POWER CONTROL DIAL
TIMER DIAL
START BUTTON
➢
When heating cycle is completed and you
open the door, the oven lamp automatically
turns on and goes off 1 min later.
➢
When you open the door whilst in a heating
cycle, the oven stops operating and the oven
lamp automatically turns on for 1 min and goes
off 1 min later. If you leave the oven door open
for more than 1 min, the oven beeps once
every minute and after 5 min the power source
check indicator ‘ON’ appears in the display
window.
CM1019-EU 2/11/00 4:56 AM Page 10