Initial settings and testing of the machine_ 44
3.
Press the Device name input area.
The pop-up keyboard appears.
Remove the existing device name and enter the device name you want to use and then press OK. Then press Next.
Keep in mind to enter the device name to be used on the network.
•
If necessary, enter the location of the machine in the Location input area.
•
If necessary, enter the information in the Administrator input area for the person to contact when any
problem occurs on the machine.
4.
Press the Test button to verify the LAN connection. When Connected appears after pressing Test, press Next.
If N/A appears, make sure that the machine is connected to the network then verify the LAN connection again.
•
If a network connection problem persists, contact your network administrator.
•
If you installed an optional fax kit or finisher, press each Test button for verify connection of them.
Summary of Contents for CLX-9250ND
Page 1: ......
Page 9: ...Setting up the hardware_ 8 Machine configuration...
Page 59: ...Initial settings and testing of the machine_ 58...
Page 69: ......
