manualshive.com logo in svg

Samsung CLP-670N, Service Manual

Share
Download
Samsung CLP-670N Service Manual Download Page 113

Alignment & Troubleshooting

Service Manual

4-54

Samsung Electronics

Multi-Feeding

Skew paper

Step

Cause and Check Point

Yes

No

1

Check that the power code is plugged into 
electrical outlet. Is it plugged?

Go to step2

Plug the power code.

2

Is the on/off switch in the ON position?

Go to step3

Turn the switch on.

3

Check if the power input and SMPS output 
are normal. Is it normal?

Go to step4

Replace the SMPS.

4

Check the LCD panel. Is it normal?

Replace the OPE PBA or 
the Main PBA.

Replace the LCD panel.

Step

Cause and Check Point

Yes

No

1

Check the paper is loaded properly. 

Go to step 2.

Adjust the paper guide in 
paper size.

2

Check the rollers on paper path is dirty.
Is it dirty?

Clean the rollers.

Go to step 3.

3

Pick up roller, feed roller is defective.

Replace the pick up roller, 
feed roller together.

Replace the SMPS.

Description

When the paper is feeding,  multiple pages are fed.

Description

Paper is skewed.

Summary of Contents for CLP-670N









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands