Samsung CLP-41x series, User Manual

Page: 187 / 308

Wireless network setup
187
2. Using a Network-Connected Machine
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133. 1
13 When the window that tells you that the network cable connection is
confirmed appears, disconnect the network cable and click
Next .
If the network cable is connected, it may have trouble finding the
machine when configuring the wireless network.
14 The wireless network connects according to the network configuration.
15 Wireless network set up is completed. After installation is finished, click
Quit .
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installation for Mac" on
page 132).
20
Using a network cable
Machines that do not support the network port will not be able to use this
feature (see "Rear view" on page 19).
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
• After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over
the network" on page 141).
• See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
Items to prepare
• Access point
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• Network cable