manualshive.com logo in svg

Samsung CL-29Z43MQ, Service Manual

Share
Download
Samsung CL-29Z43MQ Service Manual Download Page 29

Alignment & Adjustment

3-16

Samsung Electronics

3-4-2 Adjusting the Picture Straight Lines

①

Display the Cross Hatch pattern.

②

Adjust settings other than V-AMP, V-SHIFT, H-AMP and H-SHIFT so that straight lines are displayed without curves. 

⑦

When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed.

If there is no change, finish the adjustments.

③

Adjust BOW and the Angle settings so that the center line

becomes a straight line. 

④

Adjust the H-Parabola and H-Trapezium settings so that 

the left and right lines become straight.

10 BOW

11 Angle

7

Upper Coner

8

Low Coner

6

H-Parabola

9

H-Trapezium

⑤

Adjust the Upper Corner and the Low Corner settings so that

the end of the lines become straight.

⑥

Adjust the V-Linearity and V-SC settings so that the

intervals of the horizontal lines become uniform.

4 V-Linearity 

5 V SC

Summary of Contents for CL-29Z43MQ

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands