background image

39

S

P E C I A L

F

E AT U R E S

Misspellings and unusual 

characters sometimes occur during
closed caption transmissions, especial-
ly those of live events. There may be a
small delay before captions appear
when you change channels. These are
not malfunctions of the TV.

3

Press the 

VOL

+ or 

VOL 

button  to turn closed cap-
tioning on/off.

In 

caption mode

, captions

appear at the bottom of the screen,
and they usually cover only a small
portion of the picture. 

In 

text mode

, information unrelated

to the program, such as news or
weather, is displayed. Text often 
covers a large portion of the screen.

4

Press the

CH 

button  to

select “Mode.”

Press the 

VOL –  

or 

VOL +

button to select “Caption”
or “Text.” 

Viewing Closed Captions

Your TV decodes and displays the closed captions that are broadcast with certain TV shows.

These captions are usually subtitles for the hearing impaired or foreign-language trans-

lations. All VCRs record the closed caption signal from television programs, so home-record-

ed video tapes also provide closed captions. Most pre-recorded commercial video tapes pro-

vide closed captions as well. Check for the closed caption symbol in your television schedule

and on the tape’s packaging:

1

Press the 

MENU

button to

display the menu.

Press the 

CH 

button

three times to select the
“Function” menu. 

Press the 

VOL+ 

button.

2

Press the 

CH 

button

twice to select the
“Caption” menu, then
press the 

VOL+

button.

5

Depending on the particular broadcast, it might be necessary to
make changes to “Channels” and “Field”:
Use the  

CH 

, CH 

, VOL +

and 

VOL - 

buttons to make the

changes. (Follow the same procedure as in steps 3~4 above.)
Press the 

MENU

button three times to exit. 

Different channels and fields 

display different information: Field 2 
carries additional information that
supplements the information in
Field 1. (For example, Channel 1
may have subtitles in English, while
Channel 2 has subtitles in Spanish.)

02478A(E)-CHAPTER 4  4/4/03  4:01 PM  Page 39

Summary of Contents for CL-21K3W















































Reviews: