manualshive.com logo in svg

Samsung CHT-420, Service Manual, Page: 49 / 66

Share
Download
Samsung CHT-420 Service Manual Download Page 49

Samsung Electronics

6-1

6. Schematic Diagrams

◆

Block Identification of Main PCB- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-1 S.M.P.S.-1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-2 S.M.P.S.-2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-3 Function-Timer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-4  Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-5  Power Drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-6  Logic - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-7  A/V - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-8 Hi-Fi/MTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-9  TM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-10  AM/FM Receiver - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-11  Input-Output - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-12  DVD Micom- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-13  DVD AV Decoder - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-14  DVD Servo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-15  DVD Audio/Video Interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-16  Digital Amp- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

6-2

6-3

6-4

6-5

6-6

6-7

6-8

6-9

6-10

6-11

6-12

6-13

6-14

6-15

6-16

6-17

6-18

VCR Main PCB

DVD Main PCB

For schematic Diagram
- Resistors are in ohms, 1/8W unless otherwise noted.

Note

Special note : 

Most semiconductor devices are electrostatically sensitive and therefore require the special handling techniques described under the 
“electrostatically sensitive (ES) devices” section of this service manual.

Note : 

Do not use the part number shown on this drawing for ordering. The correct part number is shown in the parts list (may be slightly 

different or amended since this drawing was prepared).

Important safety notices : 

Components identified with the mark       have the special characteristics for safety. When replacing any of these components. 
Use only the same type.

Summary of Contents for CHT-420



































































Reviews:

No comments