Samsung CHT-250 Instruction Manual Download Page 68

Page: 68 / 75

About Speaker Setup

To Set the Speaker Balance

Press the SPEAKER button.
Each time you press the button, the selection will change as
follows: FL

VOL.

Press AMP VOL + and AMP VOL - buttons to adjust the speaker
volume.
The volume can be adjusted to a level between –10 and +10.

To Test the Speakers

In Stop mode, press the TEST button.

◆

The test tone will be output to the speakers in the following
order: FL (Front Speaker/L)

C (Center Speaker)

FR (Front

Speaker/R)

SR (Surround Speaker/R)

SL (Surround

Speaker/L)

SU (Subwoofer).

◆

A hissing sound from a speaker indicates that the speaker is
installed correctly.

To end the speaker test, press the TEST button again.

➢

• While the test tone is being produced, you can use the VOL

buttons to set the speaker balance for the selected channel.

• While the subwoofer is being tested, a low bass sound of

100Hz or 125Hz will be heard.

To Set the Bass/Treble

Press the BASS or TREBLE button.
Each time you press the BASS or TREBLE button, the
corresponding setting will turn on or off.

Use AMP VOL + and AMP VOL - buttons to adjust the bass or
treble of the speakers.
The bass or treble can be adjusted to a level between –10 and
+10.

1,2

FRONT SPEAKER

LEFT

FRONT SPEAKER

RIGHT

CENTER SPEAKER

SURROUND SPEAKER

RIGHT

SURROUND SPEAKER

LEFT

SUB WOOFER

SPEAKER

SUB

WOOFER

Summary of Contents for CHT-250












































































Search results

Summary of Contents for CHT-250

Reviews:

Brands by name

Popular brands

Samsung CHT-250, Instruction Manual

Search results

Summary of Contents for CHT-250

Reviews:

Brands by name

Popular brands