Samsung Chef NV51M9770 Series, Installation Manual

Page: 2 / 60

2 English
C
ont
ent
s
Contents Contents
Safety informations 2
Related equipment safety 2
Transport 2
Preparation 4
Checklist 4
Prepare to install the oven
4
Location requirements 5
Product dimensions - single ovens 5
Cabinet dimensions - single ovens 6
Product dimensions - double ovens 7
Cabinet dimensions - double ovens 7
Installation instructions 10
Prepare built-in oven 10
Remove and replace oven door(s) 10
Electrical connection 12
Install oven 14
Self-diagnosis 15
Temp sensor & Heater check 15
Safety informations
Related equipment safety
Remove all tape and packaging before using the appliance. Dispose of the
packaging after unpacking the appliance. Never allow children to play with
packaging material.
Never modify or alter the construction of the appliance. For example, do not
remove panels, wire covers or screws.
Transport
To avoid damage to the oven vent, use the transport method shown in the picture
below.
A
B
A.
Front
B. Pallet
Support the bottom of the oven from either
side when moving it into the installation
location. Leave the unit attached to the
shipping pallet until it is in front of the
cabinet opening and is ready to be lifted
into place.
DANGER
ELECTRICAL SHOCK HAZARD
To avoid risk of electrical shock, personal injury or death; verify your appliance
has been properly grounded in accordance with local codes or in absence of codes,
with the National Electrical Code (NEC). ANSI/NFPA 70-latest edition.
WARNING
MOVING HAZARD
To avoid risk of severe personal injury; this appliance requires two or more people
while handling and moving. Use of appliance moving devices is recommended.
Install_NW9000K_CHEF_WALL-DG68-01005A-00_EN+MES+CFR.indb 2 7/31/2017 4:43:17 PM