background image

28

The models in the Graphic Cards list supports FreeSync

FreeSync

 can only be used with specific AMD graphics card models. Refer to the following list for 

supported graphics cards:
Make sure to install the latest official graphics drivers from AMD that support 

FreeSync

.

 

For additional AMD graphics card models that support the 

FreeSync

 feature, visit the official AMD website.

 

Select 

FreeSync

 

Off

 if you are using a graphics card from a different manufacturer.

 

AMD Radeon R9 300 Series

 

AMD Radeon R9 Fury X

 

AMD Radeon R7 360

 

AMD Radeon R9 295X2

 

AMD Radeon R9 290X

 

AMD Radeon R9 290

 

AMD Radeon R9 285

 

AMD Radeon R7 260X

 

AMD Radeon R7 260

 

AMD Radeon RX480

Low Input Lag

Minimize input lag for fast reactions by reducing the video processing time.

 

It is recommended to set the refresh rate of the graphic card to any of 100 Hz, 120 Hz, and 144 Hz. With 60 Hz, 
the function is unavailable.

 

This feature is not available if the scanning rate on the computer is different from the settings in the 

Refresh 

Rate

 menu.

Screen Size

Select the best screen size and ratio.

In PC mode

 

Auto

: Display the picture according to the aspect ratio of the input source.

 

Wide

: Display the picture in full screen regardless of the aspect ratio of the input source.

 

17" (4:3)

: Use a 4:3 aspect ratio on a 17-inch screen. Pictures with a different aspect ratio will not be 

displayed.

 

19" (4:3)

: Use a 4:3 aspect ratio on a 19-inch wide screen. Pictures with a different aspect ratio will 

not be displayed.

 

19" Wide (16:10)

: Use a 16:10 aspect ratio on a 19-inch wide screen. Pictures with a different aspect 

ratio will not be displayed.

 

21.5" Wide (16:9)

: Use a 16:9 aspect ratio on a 21.5-inch wide screen. Pictures with a different aspect 

ratio will not be displayed.

 

22" Wide (16:10)

: Use a 16:10 aspect ratio on a 22-inch wide screen. Pictures with a different aspect 

ratio will not be displayed.

 

23" Wide (16:9)

: Use a 16:9 aspect ratio on a 23-inch wide screen. Pictures with a different aspect 

ratio will not be displayed.

Summary of Contents for CFG7 Series













































Reviews: