Samsung CF21G Series Service Manual Download Page 12

Page: 12 / 72

Luminance Table (9300K) 4-3

4-3-2 (d) WHITE BALANCE ADJUSTMENT VERIFICATION

CONDITIONS

Scanning frequency:

91 kHz / 85 Hz

Display image:

Back raster pattern

X-Y Coordinates:

x = 0.283 ± 0.02,
y = 0.298 ± 0.02

Raster Luminance

0.3 ~ 1ft-L

ABL Luminance

28 ± 1 ft-L

Brightness:

Cut-off

Contrast:

Maximum

1. Check whether the color coordinates of the

back raster satisfy the above spec.
If they do not, return to 4-3-2 (a) and readjust
all settings.

2. Display a full white pattern.

Note:

Do not touch the

G_GAIN

controls.

3. Adjust the Contrast Control on the monitor so

that the luminance of the video is about 5 ft-L.

4. Check whether the white coordinates of the

video meet the above coordinates spec.

5. Adjust the Contrast Control again so that the

luminance of the video is about 20 ft-L.

6. Check whether the white coordinates of the

video satisfies the above spec.
If they do not, return to 4-3-2 (a) and readjust
all settings.

4-3-3 Color Adjustments for 5000K

4-3-3 (a) BACK RASTER COLOR ADJUSTMENT

CONDITIONS

Scanning frequency:

91 kHz / 85 Hz

Display image:

Back raster pattern

Brightness:

Cut-off

Contrast:

Maximum

1. Select COLOR CHANNEL 2 to control the

color for 5000K.

2. Adjust the luminance of the back raster to

between 0.5 to 0.7 ft-L using the G_CUT
controls.

3. Click on the << or >> boxes next to R_CUT

and B_CUT to adjust the R-Bias to x = 0.346 ±
0.02 and the B-Bias to y = 0.359 ± 0.02.

4-3-3 (b) G-GAIN ADJUSTMENT

This procedure is the same as that for 9300K, refer
to the procedure on page 4-5.
Adjust the brightness of the G_GAIN less 2 ft-L
than brightness of procedure for 9300K.

4-3-3 (c) WHITE BALANCE ADJUSTMENT

CONDITIONS

Scanning frequency:

91 kHz / 85 Hz

Display image:

Full white pattern

Brightness:

Cut-off

Contrast:

Maximum

1. Click on the << or >> boxes next to R_GAIN

and B_GAIN to make the video white.
(For 5000K color adjustment:
x = 0.346 ± 0.02, y = 0.359 ± 0.02.)

2. Refer to the procedure for 9300K, section

4-3-2 (c) steps 2 and 3.

Luminance Table (5000K) 4-4

4-3-3 (d) WHITE BALANCE ADJUSTMENT VERIFICATION

Refer to the procedure for 9300K, section 4-3-2 (d).

4-3-4 Color Adjustments for sRGB

4-3-4 (a) BACK RASTER COLOR ADJUSTMENT

CONDITIONS

Scanning frequency:

91 kHz / 85 Hz

Display image:

Back raster pattern

Brightness:

Cut-off

Contrast:

Maximum

1. Select COLOR CHANNEL 3 to control the

color for sRGB.

2. Adjust the luminance of the back raster to

between 0.5 to 0.7 ft-L using the G_CUT
controls.

3. Click on the << or >> boxes next to R_CUT

and B_CUT to adjust the R-Bias to x = 0.313 ±
0.02 and the B-Bias to y = 0.329 ± 0.02.

4-3-4 (b) G-GAIN ADJUSTMENT

This procedure is the same as that for 9300K, refer
to the procedure on page 4-5.

You must adjust the Brightness of Green gain to
17 ± 1ft-L.

4-3-4 (c) WHITE BALANCE ADJUSTMENT

4 Alignment and Adjustments

CF21G*

4-5

CONFIDENTIAL

Without ABL

32 ft-L

Without ABL

28 ft-L

65 ft-L

Without ABL

(High Light is Activated)

21”

Without ABL

32 ft-L

With ABL

28 ft-L

Summary of Contents for CF21G Series









































































Search results

Summary of Contents for CF21G Series

Reviews:

Related manuals for CF21G Series

Brands by name

Popular brands

Samsung CF21G Series, Service Manual

Search results

Summary of Contents for CF21G Series

Reviews:

Related manuals for CF21G Series

Brands by name

Popular brands