GB
S
AMSUNG
E
LECTRONICS
15
If you have any of the problems listed below try the solutions given.
●
This is normal.
•
Condensation inside the oven
•
Air flow around the door and outer casing
•
Light reflection around the door and outer casing
•
Steam escaping from around the door or vents
●
The oven does not start when you press the
button.(CE2733/CE2733T)
•
Is the door completely closed?
●
The oven does not start when you turn the TIMER knob.(CE2713/CE2713T)
•
Is the door completely closed?
●
The food is not cooked at all
•
Have you set the timer correctly and/or pressed the
button?
(CE2733/CE2733T)
•
Have you set the timer correctly? (CE2713/CE2713T)
•
Is the door closed?
•
Have you overloaded the electric circuit and caused a fuse to blow or a breaker to
be triggered?
●
The food is either overcooked or undercooked
•
Was the appropriate cooking length set for the type of food?
•
Was an appropriate power level chosen?
●
Sparking and cracking occur inside the oven (arcing)
•
Have you used a dish with metal trimmings?
•
Have you left a fork or other metal utensil inside the oven?
•
Is aluminium foil too close to the inside walls?
●
The oven causes interference with radios or televisions
•
Slight interference may be observed on televisions or radios when the oven is
operating. This is normal.To solve this problem, install the oven away from
televisions, radios and aerials.
•
If interference is detected by the oven’s microprocessor, the display may be
reset.To solve this problem, disconnect the power plug and reconnect it. Reset
the time.(CE2733/CE2733T)
➢
If the above guidelines do not enable you to solve the problem, contact your
local dealer or SAMSUNG after-sales service.
What to Do if You are in Doubt or Have a Problem
CE2733/2713(GB1) 11/22/99 10:33 PM Page 15
