33
EN
Storing and Repairing Your Microwave Oven
A few simple precautions should be taken when storing or having your
microwave oven serviced.
The oven must not be used if the door or door seals are damaged:
•
Broken hinge
•
Deteriorated seals
•
Distorted or bent oven casing
Only a qualified microwave service technician should perform repairs.
NEVER
remove the outer casing from the oven. If the oven is faulty
and needs servicing or you are in doubt about its condition:
•
Unplug it from the wall socket
•
Contact the nearest after-sales service centre
If you wish to store your oven away temporarily, choose a dry,
dust-free place.
•
Reason:
Dust and damp may adversely affect the working
parts in the oven.
Installation & Wiring Instructions
IMPORTANT NOTE :
The mains lead on this equipment is supplied with a mouldedplug incorporating a
fuse.
The value of the fuse is indicated on the pin face of the plug and, if it requires
replacing, a fuse approved to BS1363 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a
replacement fuse cover is required, it must be of the same colour as the pin face of
the plug.
Replacement covers are available from your Dealer. If the fitted plug is not suitable
for the power points in your house or the cable is not long enough to reach a
power point, you should obtain a suitable safety approved extension lead or
consult your Dealer for assistance. However, if there is no alternative to cutting off
the plug, remove the fuse and then safely dispose of the plug. Do not connect the
plug to a mains socket, as there is a risk of shock hazard from the bared flexible
cord.
Wiring Instructions
WARNING THIS APPLIANCE MUST BE EARTHED.
This appliance must be earthed. In the event of an electrical short circuit, earthing
reduces the risk of electric shock providing an escape wire for the electric current. The
appliance is equipped with a mains lead which includes an earth wire for connecting to
the earth terminal of your mains plug. The plug must be plugged into a socket that is
properly installed and earthed.
The wires in this mains lead are coloured in accordance with the following
code:
•
Green-and yellow
: Earth
•
Blue :
Neutral
•
Brown
:
Live
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings indentifying the terminals in your plug,
proceed as follows.
Connect the green-and yellow wire to the terminal in the plug marked with the
letter E or the earth symbol (
) or coloured green or green-and-yellow.
Connect the blue wire to the terminal marked with the letter N or coloured
black.
Consult a qualified electrician or service technician if in doubt about any of
these instructions.
The manufacturer of this oven will not accept any liability for damage
to persons or material for non observance of these requirements.
There are no user+serviceable parts inside the oven and if the mains
lead of this appliance is damaged, it must only be replaced by
qualified service personnel approved by the manufacturer because
special tools are required.
WARNING
Ensure that the plug and power cord are not damaged
before use.
If you have any reason to remove the moulded plug from
this appliance, immediately remove the fuse and dispose
of the plug.
Do not connect the plug to a mains socket under any
circumstances as there is a danger of electric shock.
CIRCUITS
Your smart oven should be operated on a separate
circuit from other appliances. Failure to do this may
cause the circuit breaker to trip, the fuse to blow, or the
food to cook more slowly.
jlXZ^u{tl|TWZ]]^hluUGGwGZZGG{ SGt GX[SGYWW`GGXYaZ_Gwt
