background image

24

English

Advanced Features

Network Setup (Auto)

Use the Automatic 

Network Setup

 when connecting your 

TV to a network that supports DHCP. To set up your TV’s 
cable network connection automatically, follow these steps:

How to set up automatically
1. 

Connect your TV to your LAN as described in the 
previous section.

2. 

Turn on your TV, press the 

MENU

 button on your 

remote, use the 

 or 

 button to select 

Setup

, and 

then press the 

ENTER

E

 button.

3. 

Use the 

 or 

 button to select Network in the 

Setup

 

menu, and then press the 

ENTER

E

 button. The 

Network screen appears.

4. 

On the 

Network

 screen, select 

Network Type

.

5. 

Set 

Network Type

 to 

Wired

.

6. 

Select 

Network Setup

. The 

Network Setup

 screen 

appears.

7. 

Set 

Internet Protocol Setup

 to 

Auto

8.  Auto

 acquires and enters the needed Internet values 

automatically.

9. 

When done, press the 

RETURN

 button on your remote.

10. 

Select 

Network Test

 to check the Internet connectivity.

11. 

If the 

Network

 Function has not acquired the network 

connection values, go to the directions for 

Manual

.

Network Setup (Manual)

Use the Manual 

Network Setup

 when connecting your TV to 

a network that requires a Static IP address. 

Getting the Network Connection Values

To get the Network connection values on most Windows 
computers, follow these steps:

1. 

Right click the Network icon on the bottom right of the 
screen.

2. 

In the pop-up menu that appears, click Status.

3. 

On the dialog that appears, click the Support tab.

4. 

On the Support Tab, click the Details button. The 
Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, 
follow these steps: 

1. 

Follow Steps 1 through 6 in the “How to set up 
automatically” procedure.

2. 

Set 

Internet Protocol Setup

 to 

Manual

.

3. 

Press the 

 button on your remote to go to the first 

entry field.

4. 

Enter the 

IP Address

Subnet Mask

Gateway

, and 

DNS Server

 values. Use the number buttons on your 

remote to enter numbers and the arrow buttons to move 
from one entry field to another.

5. 

When done, press the 

RETURN

 button on your remote.

6. 

Select 

Network Test

 to check the Internet connectivity.

Network Setup

IP Address 

 : 

  

  

  

Subnet Mask 

 : 

  

  

  

Gateway 

 : 

  

  

  

DNS Setup 

 : Auto

DNS Server 

 : 

  

  

  

U

 Move   

 E 

Enter   

 R 

Return

Internet Protocol Setup 

 : Auto 

Network

U

 Move   

 E 

Enter   

 R 

Return

Network Type 

 : Wired 

Network Setup 
Network Test

[UC5000]BN68-02727A-LPREng.indb   24

2010-02-23   오후 3:48:32

Summary of Contents for BN68-02727A-00




















































Reviews: