background image

English - 

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your 

children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious 

injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, 

install the anti-fall device for safety purposes, as follows.

To avoid the TV from falling:

Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the 

screws have been firmly installed onto the wall.

You may need additional material such as an anchor depending on the type of 

wall.

Since the necessary clamps, screws, and string are not supplied, please 

purchase these additionally.

Remove the screws from the centre back of the TV, put the screws into the clamps, 

and then fasten the screws onto the TV again.

Screws may not be supplied with the product. In this case, please purchase the 

screws of the following specifications. 

Screw Specifications

For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15

Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong 

string and then tie the string tightly.

Install the TV near to the wall so that it does not fall backwards.

It is safe to connect the string so that the clamps fixed on the wall are equal to or 

lower than the clamps fixed on the TV.

Untie the string before moving the TV.

Verify all connections are properly secured. Periodically check connections for any 

sign of fatigue for failure. If you have any doubt about the security of your connections, 

contact a professional installer.

¦

N

N

N

N

•

N

N

N

Wall

Wall

[350]BN68-02101A-00Eng.indb   25

2009-04-21   �� 5:32:49

Summary of Contents for BN68-02101A-00






























Reviews: