Samsung BN68-01736C-00 User Manual Download Page 44

Page: 44 / 69

English - 2

Upgrading the Software

to keep your product up-to-date with new Digital television

features then software upgrades are periodically broadcast as

part of the normal television signal.

It will automatically detect these signals and display the

software upgrade banner. You are given the option to install the

upgrade.
1.

Press the

MENU

button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENtER

button.

Press the

▲ or ▼

button to select "Setup", then press the

ENtER

button.

Press the ▲ or ▼ button to select "System", then press the

ENtER

button.

Press the ▲ or ▼ button to select "Software Upgrade",

then press the

ENtER

button.

Press the ▲ or ▼ button to select “Software Information”,

“Manual Upgrade” or “Standby Mode upgrade”.

Press the

ENtER

button.

♦

Software Information

Press the

ENtER

button, then the current software version is shown. To display the software

version information, press the

ENtER

button again.

To switch to an alternative version, press the red button.

Press the blue button to reset, activate the upgrade and restart.

♦

Manual Upgrade

Press the

ENtER

button to search for new software from the currently broadcasting channels.

♦

Standby Mode Upgrade: On / Off

Press the

ENtER

button. To continue software upgrade with master power on, Select On

by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is

automatically conducted. Since the power of the unit is turned on internally, the screen may be on

slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software

upgrade is completed.

Press the

EXIt

button to exit.

Checking the Signal Information

You can get information about the signal status.

Press the

MENU

button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the

ENtER

button.

Press the

▲ or ▼

button to select "Setup", then press the

ENtER

button.

Press the ▲ or ▼ button to select "System", then press the

ENtER

button.

Press the ▲ or ▼ button to select "Signal Information", then press the

ENtER

button.

Press the

EXIt

button to exit.

If the signal status is poor, the "No signal." message is displayed.

➣

Move

Enter

Return

Signal Information

Service: ?
Service ID:0000
Multiplex: ? (tSID 0000, ONID 0000)
Network: ? (ID 0000)
bit error level: 10
Signal Strength: 0

Return

DtV

System

Product Information



Signal Information



Software Upgrade



Reset



Move

Enter

Return

DtV

Software Upgrade

Software Information



Manual Upgrade



Standby Mode upgrade : On



Move

Enter

Return

DtV

BN68-01736A-X1Eng-0623.indd 42

2008-07-14 �� 10:56:48

Summary of Contents for BN68-01736C-00






































































Search results

Summary of Contents for BN68-01736C-00

Reviews:

Related manuals for BN68-01736C-00

Brands by name

Popular brands

Samsung BN68-01736C-00, User Manual

Search results

Summary of Contents for BN68-01736C-00

Reviews:

Related manuals for BN68-01736C-00

Brands by name

Popular brands