Samsung BN68-00951A-00 Owner'S Instructions Manual Download Page 68

Page: 68 / 72

Troubleshooting:

Before Contacting Service Personnel

English - 68

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,

distorted sound

Remote control malfunctions

Screen is black and power indicator
light blinks steadily

◆

Check that the mains lead has been connected to a wall socket.

◆

Check that you have pressed the power button (On/Off) and the

POWER

(

) button.

◆

Check the picture contrast and brightness settings.

◆

Check the volume.

◆

Check the volume.

◆

Check whether the volume

MUTE

(

) button on the remote control

has been pressed.

◆

Adjust the colour settings.

◆

Check that the broadcast system selected is correct.

◆

Try to identify the electrical appliance that is affecting the television,
then move it further away.

◆

Plug your television into a different mains socket.

◆

Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.

◆

Replace the remote control batteries.

◆

Clean the upper edge of the remote control (transmission window).

◆

Check the battery terminals.

◆

On your computer check; Power, Signal Cable.

◆

The TV is using its power management system.

◆

Move the computer’s mouse or press any key on the keyboard.

◆

On your equipment check (STB, DVD, etc) ; Power, Signal Cable.

◆

The TV is using its power management system.

◆

Press the Source button on the panel or remote control.

◆

Turn the TV off and on.

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.

BN68-00941A-00Eng 6/2/05 8:45 AM Page 68

Summary of Contents for BN68-00951A-00









































































Search results

Summary of Contents for BN68-00951A-00

Reviews:

Related manuals for BN68-00951A-00

Brands by name

Popular brands

Samsung BN68-00951A-00, Owner'S Instructions Manual

Search results

Summary of Contents for BN68-00951A-00

Reviews:

Related manuals for BN68-00951A-00

Brands by name

Popular brands