Wireless Network
Wireless Router
Broadband
service
✎
NOTES
■
If your wireless router supports DHCP, this player can use a DHCP or static IP
address to connect to the wireless network.
■
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
■
The player supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
■
Select a channel on the wireless router that is not currently being used. If the
channel set for the wireless router is currently being used by another device nearby,
it will result in interference and communication failure.
■
In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray
players do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in
networks running in the 802.11n mode.
■
Wireless LAN, by its nature, may cause interference, depending on the operating
conditions (router performance, distance, obstacles, interference by other radio
devices, etc).
Settings
The Initial Settings Procedure
●
The Home screen will not
appear if you do not configure
the initial settings.
●
The OSD (On Screen Display) may
change in this player after you
upgrade the software version.
●
The access steps may differ
depending on the menu you
selected.
●
After the initial settings process
is complete, you can then
operate the panel buttons and
remote control.
After you have connected the player
to your TV, turn on the TV and player.
When you turn on the player the first
time, the player's Initial Settings screen
appears on the TV. The Initial Setting
procedure lets you set the On Screen
Display (OSD) and menu languages,
the aspect ratio (screen size), the
network type, and connect the player
to your network.
To run the Initial Settings procedure,
follow
these steps:
1.
Plug in the Blu-ray player, turn on
your TV, and then turn on the Blu-
ray player by pressing the
pOWER
button on the remote. The Initial
Settings Language screen appears.
>
move
"
Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
Български
Hrvatski
dansk
Nederlands
English
2.
Select the desired language, and
then press the
v
button. The
Start screen appears.
a
previous
"
Select
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
3.
Press the
v
button. The TV
Aspect screen appears.
4.
On the TV Aspect screen, select the
desired TV Aspect Ratio, and then
press the
v
button. The Network
screen appears.
✎
NOTES
■
An explanation of each Aspect Ratio
appears on the screen. Highlight
each choice to see each explanation.
If you have an HDTV, we suggest
you choose 16:9 original.
10
