10
Wireless Network
For BD-F8 series
"
If the wireless router supports DHCP, your product can use a DHCP or static IP address
to connect to the wireless network.
"
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
"
The product supports only the following wireless security key protocols: WEP (OPEN/
SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
"
Select a channel on the wireless router that is not currently being used. If the channel
set for the wireless router is currently being used by another device nearby, it will result
in interference and communication failure.
"
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the
Encryption type on your router or router to WEP, TKIP or TKIP-AES (WPS2Mixed),
the product will not support a connection in compliance with new Wi-Fi certification
specifications.
"
If your router supports WPS (Wi-Fi Protected Setup), you can connect to the network
via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will
automatically configure the SSID and WPA key in either mode.
"
Wireless LAN, by its nature, may cause interference, depending on the operating
conditions (router performance, distance, obstacles, interference by other radio
devices, etc).
"
To use the AllShare function with your PC, your PC should be connected to the same
network as your product.
