![background image](http://html.mh-extra.com/html/samsung/b2700/b2700_service-manual_338930028.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
7-2
This Document can not be used without Samsung's authorization
5
8
7
6
1) When removing a KEY BRACKET from a Front,
push the left HOOK(2 POINT) to the left side,
then push the other side to right.[Figure 1]
2) lifting KEY PAD to detach from KEY
BRACKET.[Figure 2]
1) Push the left FRONT HOOK 2 POINTS to left
then separate from PBA.[Figure 1]
2) Detach PBA From FRONT.[Figure 2]
※
caution
1) Be careful not to get a damage of LCD FPCB
and ENCLOSER.
1) Detach electric conduction tape form key bracket
by tweezers. [Figure 1]
2) Detach KEY PBA from KEY BRACKET.
[Figure 2]
※
caution
1) Don't detach KEY PBA from KEY BRACKET not
for exchanging Key bracket. KEY PBA is difficult
to recycle.
1) Remove Encloser which is 2 pins Connector
from PBA. [Figure 1]
2) detach Torch Light by using tweezers. [Figure 2]
※
caution
1) Be careful not to make a damage of wire.
2) Be careful not to make a damage of FPCB .
< Figure 2 >
< Figure 1 >
HOOK 2 POINT
< Figure 2 >
< Figure 1 >
KEY PAD
HOOK 2 POINT
< Figure 2 >
< Figure 1 >
Electric
conduction Tape
< Figure 2 >
< Figure 1 >
Encloser 2 pin
Connector
Torch Light