Here are a few recommendations that you should follow when using
your air conditioner.
Topic Recommendation
The heat pump inside the air conditioner absorbs heat from
outside air and brings it indoors. If the temperature of the outside
air drops, the air conditioner will heat less. If you find that the
room is not warm enough, use an additional heating appliance.
Heating
performances
The air conditioner circulates warm air to heat your room;
as a result, some time will be required after starting
the air conditioner to warm the entire room. If necessary,
set the air conditioner going a short time before you wish
to use the room.
Warm air
circulation
When outside temperatures are low and humidity is high,
frost may form in the unit’s condenser when heating with your
air conditioner.
If this happens:
◆
The unit stops heating
◆
The air flow blades stop swinging
◆
The Deice mode is triggered automatically for about
five minutes.
No intervention is required from you; after about five minutes,
the air conditioner starts operating again normally.
Frost
If both the indoor and outdoor temperatures are high and you
select the Heat mode, the fan and compressor in the unit may
stop at times. This is normal; simply wait until the air conditioner
switches on again.
High indoor
and outdoor
temperatures
If a power failure occurs when the air conditioner is operating,
the unit is switched off. When the power returns,
the air conditioner starts up again automatically.
Power failure
Operating Recommendations
E-
10
