22
O
ther
s
Problem
Solution
Fan speed is
not changing
according to the
Comprehensive Air-
quality.
§
Set the fan speed to Auto. When the fan speed is set
to High, Medium, Low, or Sleep, the fan speed will
not change automatically.
Ultrafine particulate
matter(PM2.5) is
not changing from
"Excellent" (09).
§
In an enclosed space, level may not be changed from
"Excellent". If there are changes in the level when you
open the windows to ventilate, or burn the aroma
candles or incense, it’s normal.
Filter replacement
indicator not turning
off
§
After replacing the 2-in-1 filter, press the [
] for
over 3 seconds to reset the filter replacement alert.
Life stage reduction
after the filter is
used for few days
§
Internal sensor of the air purifier displays the
remaining service life of filter at four stages by
sensing the filter pollution level. Even if it is very
clean through visual inspection, actually PM2.5 is
seriously poluted. Therefore, the remainging life
stage of the filter could be shortened.
Strange indication is
displayed
§
If you see
C103
,
105
,
154
,
155
,
163
, contact the service
center.
Air out only from
the right side
§
The design is intended for purifying the air
efficiently with the wind rising through whirling. As
the wind flows in the clockwise direction, you may
feel that the front side is weaker while the rear side
is stronger for the wind flown out from the upper air
outlet.
Troubleshooting
Summary of Contents for AX60M5051WS/SG
Page 23: ......
