18
English
Using
the
Air
Pu
rifier
If you hear a chime sound when you connect the power plug, it means that the power is connected properly.
Turning on/off the air purifier
•
The device turns on with a chime sound, and starts operation
in Smart mode.
–
Immediately after the device starts operation, a welcome
message, app linkage reminder and 'sensor ready' indicator are
displayed for 3 seconds each in sequential order. After that, the
air quality colour, PM levels and operation mode are displayed.
–
Air quality is shown with colour indicators: PM10, PM2.5,
PM1.0, GAS
Concentrations of PM10, PM2.5 and PM1.0 are shown
•
During operation of the device, the front panel is kept open about
10 to 30 mm. Note that the front panel opens about 40 mm and then
closes by 25 mm before the device starts operation for the first time
after the power plug is connected.
•
The front display brightness changes depending on the ambient
light intensity.
Changing the operation mode
Change the device operation mode as necessary.
•
Press the [
] button to select the operation mode to use.
–
Each time you press the button, the mode changes in the following
order: Smart → High → Wind-Free → Sleep → Pet → Smart.
•
If you switch the device to Sleep mode, the front panel closes, the
device operates at the lowest fan speed and the colour air quality
indicator only illuminates.
–
If you change the operation mode after using Sleep mode for
more than 10 seconds, Sleep mode turns off and the 'sensor
ready' indicator appears.
•
In Smart mode, the fan speed is automatically adjusted
(High → Medium → Low) depending on the surrounding dust and
odour conditions to keep the room air clean.
–
If the room air becomes clean after device operation in Smart
mode for a certain period of time, the front panel closes and the
device automatically switches to 'power saving mode'.
Power saving mode automatically turns off if the room air quality
decreases. The mode can manually be turned off by changing the
fan speed.
–
While in Smart mode, use the SmartThings app to activate Sleep
mode. When it becomes very dark around the device, the front
panel will automatically close itself, the front display will turn off
and the device will operate at the lowest fan speed.
•
The Pet mode effectively removes pet odours and fur in the air. In
Pet mode, the fan speed is automatically adjusted depending on the
surrounding dust and odour conditions to keep the room air clean.
Using the Air Purifier
Using the Air Purifier
DB68-11328A-01_IB_ACR AX9500A_Small PET_SA_EN.indd 18
DB68-11328A-01_IB_ACR AX9500A_Small PET_SA_EN.indd 18
2022-06-03 오전 8:34:59
2022-06-03 오전 8:34:59
