E-
19
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity w ithout low ering the room temperature too much.
1 If necessary, press the (On/Off) button.
Result: The air conditioner starts up in
the
Cool mode
.
The unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
2 If the is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
The unit beeps each time you press the
button.
The air conditioner runs in the Dry mode.
You can change modes at any time.
3 To adjust the temperature, press the buttons one or more times
until the required temperature is displayed.
Possible temperatures are between 64
°
F and 86
°
F inclusive.
Result:
Each time you press the buttons:
-
The temperature is adjusted by 1
°
F
-
The unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4 To control the direction of the air flow, refer to page 24.