You must select the Cool mode if you wish to lower the temperature
in your room. You can also set the fan speed.
1
If necessary, press the
(On/Off) button.
Result:
◆
The operating mode indicator (COOL or FAN) on the
unit comes on.
◆
The air conditioner starts up in the mode selected
when the unit was last used.
◆
The unit beeps twice.
☛
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
◆
Plugged in
◆
Stopped
It will start up normally after a three-minute rest period.
2
If the COOL indicator is not lit up on the unit:
◆
Press the COOL button on the remote control
or
◆
Press the POWER/MODE button on the unit one or more times until
the COOL indicator lights up
Result:
◆
The unit beeps each time you press POWER/MODE.
◆
The air conditioner starts up in Cool mode.
➢
You can change modes at any time.
3
To adjust the temperature, press the or
buttons on the remote
control one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
◆
Each time you press the temperature buttons:
– The temperature is adjusted by 1°C and
displayed on the control panel
– The unit beeps
◆
The air conditioner starts cooling if the room temperature
is higher than the selected temperature.
4
To set the fan speed to...
Then...
High
Press the button on the remote control.
Low
Press the button on the remote control.
Result:
Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 10.
Cooling Your Room
Remote Control
Control Panel
E-
8
