E-
10
Ventilating Your Room
If necessary, press the
(On/Off) button.
Result:
◆
The air conditioner starts up in the mode selected when
the unit was last used.
◆
The unit beeps twice.
2
To set the fan speed:
◆
Press the button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
4
To control the direction of the air flow, refer to page 20.
5
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
◆
Press the
button on the unit one or more times until the fan speed
(F1, F2 or F3) is displayed.
Result:
◆
The unit beeps each time you press the
button.
◆
The air conditioner starts up in the Fan mode.
➢
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
3
If the air in your room is stale, you can ventilate the room using the Fan feature.
1
If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position (
).
Result:
◆
The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position (
).
Result:
◆
The air simply circulates inside the room.
