E-
Installation
Checkpoints prior to installation
Check the cabinet and front grille of the unit for any harmful defects
such as scratches.
Be sure to check the power supply.
- Refer to the specifications on the label attached to the unit.
Before installation, be sure to check the installation area or the air
conditioner, and drain hose.
Installation Conditions
As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditioner,
and for prevention of any vibration or noise.
If it is weak, reinforcement work should be performed separately.
It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunlight.
When installing it in the south or east side due to unavoidable
circumstances, it is advisable to install the sunshade to prevent the
direct sunlight.
In this case, take care not to cause any hindrance to the flow of outside air.
3 When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of air.
When operating the air conditioner in closed areas such as inner building
with cooling operation, and result in trouble with the unit.
See the illustration below.
500mm
500mm
75mm
min.
300mm
500mm
150mm min.
"A"
Approx.3
750mm
45
45
The appliance must be fixed well by screw or similar
method.
Awning
Fence, wall
or other
obstacle
If the wall is greater than 50mm thick,
cut the wall back on a 45° angle if possible.
Outdoor side
Indoor side
00mm or more
MODEL
“A”
AW07/AW09
45
AW
70
DB98-27204A.indd 11
2007-1-23 9:18:44
