E-
15
Solving Common Problems
Explanation / Solution
◆
Check that the circuit breaker used for the air conditioner has not been
triggered.
◆
Check that the power cable is plugged into a wall socket and the socket is
switched on, if necessary.
◆
Check that the temperature indicator on the unit is lit; if necessary,
press the
(On/Off) button on the remote control or unit.
◆
Check that there are no obstacles between you and the unit.
◆
Replace the remote control batteries if necessary.
◆
Check that you are close enough to the unit (seven metres/yards or less).
◆
Ventilate the room.
Problem
The air conditioner does
not
operate at all
The air conditioner does not
operate with the remote
control
Odors are permeating the
room during air conditioning
◆
Check that you are pointing the remote control at the remote control sensor
on the unit.
◆
Replace the remote control batteries if necessary.
No beep is heard when you
press the
(On/Off) button
on the remote control
◆
Check that the correct operating mode has been selected(Cool).
◆
The room temperature may be too low.
◆
Dust may be blocking the air filter; refer to page 16 for cleaning instructions.
◆
Check that there is no obstacle blocking the air flow into or out of the unit.
The air conditioner does not
cool
◆
Check that the timer has been programmed correctly; refer to page 10~12.
The timer is not correctly
triggered
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Technical Specifications
Model
Power Supply
AW05MDYEA
Design and specifications are subject to change without notice.
220-240V~, 50Hz
➢
Max current is measured according to IEC standard for safety and
current is measured according to ISO standard for energy efficiency.
This condition belongs to the above model.
