E-
14
Heating Your Room
You must select the Heat mode if you wish to adjust the:
Heating temperature
Fan speed when heating
1
If necessary, press the
(On/Off) button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
Caution
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
If the is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it appears
Result
:
The indoor unit beeps each time you press the
button.
The air conditioner runs in Heat mode.
Note
You can change modes at any time.
3
To adjust the temperature, press the
button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result
:
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts heating, provided that the room
temperature is higher than the selected temperature
(selected tempe3°C).
If the room temperature reaches the set temperature, the
air conditioner stops heating, but the fan is still operating.
4
Select the fan speed by pressing the
button one or more times until
the required setting is displayed:
Automatic (rotated :
)
Low
Medium
High
Result
:
Each time you press the
button, the indoor unit beeps.
For the first 3 to 5 minutes, the fan operates very slowly until
the air has been sufficiently warmed. Once the correct
temperature has been reached, the fan is automatically set to
the required speed.
5
To control the direction of the air flow, refer to pages 18 and 19.
AVXWP@@_IB_E_27713_1.indd 14
2007-04-09 ｿﾀﾈﾄ 9:56:34