E-
13
ENGLISH
Selecting the Cool Mode
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling.
1
If necessary, press the
(On/Off) button.
Result
:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until is displayed.
Result
:
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Cool mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
If the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan operates consistently.
4
Press the
button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
)
Low
Medium
High
Result:
Each time you press the
button, the indoor unit beeps.
The fan speed indicator increases and decreases
continuously and turns round each time you press
the
button.
Note
The fan speed indicator of the indoor unit varies according to the
temperature in the Automatic fan speed.
5
To control the airflow direction, refer to page 21.
Control Panel
AVXWH｣ｪ｣ｪ_IB_E_27872.indd 13
2007-05-03 ｿﾀﾈﾄ 2:27:23
