34_
installing your air conditioner
Indoor Unit Setting
1.
Before installing the indoor unit, assign an address to the
indoor unit according to the air conditioning system plan.
2.
The address of the indoor unit is assigned by adjusting
MAIN(SW01, SW02) and RMC(SW03, SW04) rotary switches.
Additional Functions
Setting MAIN Address
The MAIN address is for communication between the
indoor unit and the outdoor unit. Therefore, you must
set it to operate the air conditioner properly.
You can set the MAIN address from ‘00’ to ‘99’ by mixing
SW01 and SW02.
The MAIN address from ‘00’ to ‘99’ should differ from
each other.
Check the indoor unit address on the plan that you are
to install and set the address according to the plan.
You may not need to set MAIN address if you
selected Auto Address Setting from the outdoor
unit: see details on the outdoor unit installation
manual.
Note
When MAIN address is set as “12”.
For Example
Setting RMC Address
The SW03, SW04 RMC switch is the address setting
switch for controlling the indoor unit with the centralized
controller.
You must set the SW03, SW04 and K2 switch when using
the centralized controller.
When RMC address is set as “12”.
For Example
SW03
SW04
No.
Function
ON
OFF
SW05
K1
-
-
-
K2
Centralized controller
Not use
Use
K3
-
-
-
K4
-
-
-
����
�� �� �� ��
No.
Function
ON
OFF
SW06
K5
Heating Current Temperature Compensation
+2°C
+5°C
K6
Filter Time
1,000
hours
2,000
hours
K7
-
-
-
K8
-
-
-
����
�� �� �� ��
No.
Function
ON
OFF
SW07
K9
Indoor Expansion Valve
For Heating Stop
Fix 80 step
0 or 80 step
K10
Wired Remocon Group
Master
Not Use
Use
K11
External control
Not Use
Use
K12
-
-
-
����
�� ��� ��� ���
SW01
SW02
SW03
SW05
SW06
SW07
SW04
AVXTJ£ª£ª_IB IM_E_29814.indd 34
2009-3-10 16:48:45
