7
ENGLISH
3.
Ƹϑʪϩиͱͱθ͔ͱθʪϑʀθʪиϑϩͱѣуϩ˵ʪɵɇʀ̧ʀͱЭʪθϩͱϩ˵ʪиɇ̷̷ࢋAͱ͝͝ʪʀϩϩ˵ʪΧͱиʪθʀɇɵ̷ʪϑ࣍ǤߢࡡǤߣ࣎ɇ͝ʒ
communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable
length.
4.
Ǯ˵ʪ͝ʀͱ͝͝ʪʀϩ̈͝˝ϩ˵ʪΧͱиʪθʀɇɵ̷ʪϑϩͱǤߢɇ͝ʒǤߣࡡ˙ɇϑϩʪ͝ϩ˵ʪťA9ϩʪθ͔̈͝ɇ̷ϑʀθʪиϑ࣍AĘߦ࣎ϩͱɇϩͱθαЇʪͱ˙
6 N·cm or less.
Ɗʀθʪиϑ̈іʪࡠđߤईуईߧ
• You can connect up to 16 indoor units to a Wi-Fi Kit.
ߣ
Ǥߣ Ǥߤ
ߤ
ߥ ߦ
Ķ
Ĺ
ĺ
ⓐ
ĸ
ķ
10 and
over
10 and over
50 and over
10 and over
Screw
holes
࢘
Be sure to secure space of at least
10 mm (up/right/left) and 50 mm
(down) around the back cover
ɵʪ˙ͱθʪѣӱ͝˝ϩ˵ʪɵɇʀ̧ʀͱЭʪθͱ͝
the wall.
࢘
Fix the screws to the
screw holes.
࢘
Do not over-tighten the PCB
terminal.
ǤߢǤߣߢߣ
Wi-Fi Kit
PCB port
Indoor unit
Unit: mm
Back cover
Item
Contents
Item
Contents
ĵ
Power/communication terminals
ĸ
LED
Ķ
Tracking/Reset button
Ĺ
Network PBA
ķ
Micro SD card slot
ĺ
Interface module PBA
5. Assemble the Wi-Fi Kit again.
•
Ã͝ϑʪθϩϩ˵ʪ˙θͱ͝ϩʀͱЭʪθϩͱϩ˵ʪЇΧΧʪθ˝θͱͱЭʪϑɇϑϑ˵ͱӥ͝͝ϩ˵ʪѣ˝Їθʪࢋ˙ϩʪθɇϑϑʪ͔ɵ̷цࡡ
make sure that there is no gap between the covers.
NOTE
NOTE
ki]_TW_[Y]hTW[piptuhzhGvjmG~TmGrl|luUGGG^
YWYYTXXTYZGGG㝘㤸GXXaWWaZZ
