manualshive.com logo in svg

Samsung ASHM070VE, Service Manual, Page: 67 / 70

Share
Download
Samsung ASHM070VE Service Manual Download Page 67

U P D A TE  LOG  SHEET

Application date

Page

Part#

Note(Cause & Solution)

S/Bulletin#

Use this page to keep any special servicing information. (Service Bulletin, etc.)

If only parts number changes, Just change parts number directly on parts list.

And if you need more information, please see the service bulletin

Copyright

®œ 1995 by Samsung Electronics Co., Ltd.
All rights reserved.
This manual may not, in whole or in part, be
copied, photocopied, reproduced, translated,
or 
converted to any electronic or machine read-
able 
from without prior written permission of
Samsung Electronics Co., Ltd.

SyncMaster 17GLi/CMG7387L Service
Manual
First edition June 1995.

Tr a d e m a r k s

Samsung is a registered trademark and
SyncMaster 17GLi/CMG7387L and
MacMaster
Cable Adapter are trademark of Samsung
Electronics Co., Ltd.

Macintosh, Centris, Quadra, Duo Dock, and
Power Macintosh are trademark of Apple
computer, Inc.

All other trademarks are the property of their
respective owners.

Summary of Contents for ASHM070VE







































































Reviews:

No comments