6
No
Parts
Procedure
Remark
Fan and Motor
Heat Exchanger
Compressor
2
3
4
1) Do “1”, above.
2) Remove the nut flange (Turn to the right to
remove, as it is a left hand screw).
3) Separate the fan.
4) Loosen four fixing screws to separate the motor.
5) Loosen five fixing screws and seperate the
motor bracket from. the base.
1) Do “1”,“2”, above.
2) Loosen two fixing screws of left and right side.
3) Disassemble the inlet and outlet pipe by weld-
ing.
4) Separate the heat exchanger.
1) Do “1”,“2”,“3”, above.
2) Open the terminal cover of compressor and
unscrew the connection terminal.
3) Disassemble the inlet and outlet pipe of com-
pressor by welding.
4) Loosen the three bolts of the lower part.
5) Separate the compressor.
DB98-05495A(1)-1 3/21/02 4:27 PM Page 6
Index
Summary of Contents for AS12AAMC
