background image

Switching the Unit On and Off Automatically (On/Off Timer)

E-

15

MODE TURBO OFF

You can set the timer to switch the air conditioner on and/or off
automatically at given times.

Example:

You wish to start cooling your room before you return
from work; you decide to:

Switch the air conditioner on at 5:30 p.m.

Switch it off at 11:30 p.m.

You can set:

The switch-on time only

The switch-off time only

Both the switch-on and switch-off times

Check that the current time is correct before setting
the timer; if it is not correct, refer to page 8 for details
on how to set it.

1

If necessary, press the      (On/Off) button.

2

Select the required mode by pressing the       button on the remote
control one or more times until the appropriate indication appears  
(in the above example,     ).

3

Press the        button under the cover on the remote control.

Result:

The     indication flashes. 

The current preset time is displayed.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

If you do not press a button within a few seconds, the Timer
function is cancelled and you must press the       button again.

4

To set the switch-on time, press the       or 

buttons.

To...

Then...

Increase the time in ten-minute intervals

Press the 

▲ 

button.

Increase the time in one-hour intervals

Hold down the 

▲ 

button.

Decrease the time in ten-minute intervals

Press the 

▼ 

button.

Decrease the time in one-hour intervals

Hold down the 

▼ 

button.

Result:

AM or PM is displayed to indicate whether the setting
corresponds to a time before or after midday.

5

When you are satisfied with the switch-on time, press       .

Result:

The indoor unit beeps. 

The TIMER indicator on the indoor unit lights up yellow.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

If not necessary to operate the air conditioner until the set up
time for starting, press       (On/Off) button off.
The air conditioner will start up automatically when the
switch-on time is reached.

6

To set the switch-off time, press the       button.

Result:

The     indication flashes.

The current preset time is displayed.

7

Set the switch-off time, following the instructions in Step 4.

8

When you are satisfied with the switch-off time, press       .

Result:

The indoor unit beeps. 

The TIMER indicator on the indoor unit lights up yellow.

The air conditioner will switch off automatically when the 

switch-off time is reached.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

If you wish to cancel the timer, refer to page 18.

IMPORTANT

IM

MODE

Summary of Contents for AS12A1VC











































Reviews: