Selecting the Cool Mode
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling.
E-
10
To control the airflow direction, refer to page 19.
5
Press the button on the remote control until is displayed.
Result:
◆
The indoor unit beeps each time you press the
button.
◆
The air conditioner runs in the Cool mode.
2
You can change modes at any time.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
The fan speed indicator of the indoor unit varies according to
the temperature in the Automatic fan speed.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result:
◆
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆
If the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
◆
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan operates consistently.
3
Press the
button to select the fan speed until the required setting
is displayed.
Result:
◆
Each time you press the
button, the indoor unit beeps.
◆
The fan speed indicator increases and decreases
continuously and turns round each time you press
the
button.
4
1
If necessary, press the (On/Off) button.
Result:
◆
The operation indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode you selected last.
◆
The indoor unit beeps.
Automatic (rotated : )
Low
Medium
High
Control Panel
AS09BPAN IB_E_23940 10/20/05 1:22 PM Page 10
