Samsung ARJ series, Installation Manual

Page: 18 / 21

How to extend the power wiring
Items to prepare
DPNQSFTTPSBOEJOTVMBUJPOUBQFTIPVMECFQSFQBSFECZBOJOTUBMMBUJPOUFDIOJDJBO
1. As shown in the figure, peel off the shields from the rubber/wire
of the power cable.
- Peel off 20 mm of the wire shields of the tube installed already.
2. Insert both sides of core wire of the power cable into the connection sleeve.
3. Using a compressor, compress the two points and flip it over
and compress another two points in the same location.
- The compression dimension should be 8.0.
- After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
4. Wrap it with the insulation tape twice and position your
contraction tube in the middle of the insulation tape.
5. Apply heat to the contraction tube to contract it.
6. After tube contraction work is completed, wrap it with the
insulation tape to finish.
Tools Crimping pliers $POOFDUJPOTMFFWF NN Insulation tape $POUSBDUJPOUVCF NN
Spec .)
YJODI
YNN )Y0%
8JEUI
JODI NN
YJODI
YNN -Y0%
Shape
JODI NN
Insulation tape
Contraction tube
120
60
20 20 20
1 8 0
1PXFSDBCMF QSPWJEFECZVT
20
8JSFUVCFQPXFSDBCMF
$POOFDUJPOTMFFWF
Comp. dim.
Compress it 4 times
JODI NN
Insulation tape
t "GUFSQFFMJOHPòUIFUVCFXJSFZPVNVTUJOTFSUBDPOUSBDUJPOUVCF
t *ODBTFPGFYUFOEJOHUIFFMFDUSJDXJSFQMFBTF%0/05VTFBSPVOETIBQFEQSFTTJOHTPDLFU
*ODPNQMFUFXJSFDPOOFDUJPOTDBODBVTFFMFDUSJDTIPDLPSBöSF
6OJUJODI NN
0.79(20)
0.79(20)
0.79(20) 0.79(20)
2.36(60)
4.72(120)
7.09(180)
English-18