Using the Auto clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.
When the air conditioner is operating;
Indoor unit display
1. Press
the
Settings
button.
2. Press
the ,
or
Settings
button until (Clean) indicator starts to blink.
3. Press
the
SET
button to set the Auto clean function.
- 3 seconds after setting Auto clean function, (Clean) indicator on the remote
controller display will disappear and Auto clean (
), Timer (
) indicator will
turn on the indoor unit display. Auto clean function will be activated after the air
conditioner stops operating.
-
Duration of the Auto clean function can be different depending on the previous
operation mode used.
Auto(cool), Cool, Dry mode : 30 minutes.
Auto(heat), Heat, Fan mode: 15 minutes.
Cancel
f
Press the
Settings
button
Press the
,
or
Settings
button to
make the (Clean) indicator blink and press the
SET
button.
t
When the operation mode is set during Auto clean function is activated,
the air conditioner will operate in chosen operation mode and the Auto
clean function will be re-activated when the operation stops.
t %VSJOHUIFBVUPDMFBOGVODUJPOJOEPPSGBOXJMMDPOUJOVFUPSVOBOEBJS
flow blade will remain open to allow the indoor coil to dry.
Setting the Beep sound
Beep sound from the indoor unit can be muted.
1. Press
the
Settings
button.
2. Press
the ,
or
Settings
button until (Beep) indicator starts to blink.
3. Press
the
SET
button to mute the beep sound.
-
3 seconds after setting
Beep sound
function, (Beep) indicator on the remote
controller display will disappear and
Beep sound
function will begin.
English-24
Summary of Contents for AR09KSWSJWKNCV
Page 2: ......
Page 62: ...English 61 ...