background image

Samsung Electronics

3-1

3. Alignment and Adjustments

3-1 Test Mode

Q

 How to Approach Test Mode

 

 You can approach the test mode by pressing the on/off switch of

         indoor unit for 5 seconds.

Q

Test mode operation option

 

After installing the air conditioner, check whether each subordinate is normally operated or not by operating the test mode.

       

 

When an Error occurs, display the Error Mode.

       

 

Operation Mode :

 Cool mode. operate the cool mode by operating the compressor by force without the compressor ON/OFF

                                            according to the set temperature/indoor temperature. (Do not follow the antifreeze control)

       

 

Up-down louver :

 Up-down swing mode

       

 

Indoor Fan :

  Turbo

● 

Because the teat mode operate the cool mode by force not related to the set temperature / indoor 

  temperature, check whether each subordinate is operated normally or not after completing installation

  and must turn off the power of the air conditioner.

Note

Summary of Contents for AR09HSSDBWKNEU














































































































Reviews: