background image

18

English

Ener

gy

-Sa
ving F

eatur

es

Energy-Saving Operation

Energy-Saving Features

12

 

Single user function

For the multi system, this function is not supported.

Use the Single user function to reduce electricity 

consumption while staying cool or warm. You can 

select this function in the Cool and Heat modes.

In the Cool or Heat mode

  NOTE

• 

When the Single user function starts, the 

 

pattern appears on the remote control for a few 

seconds, and vertical air swing begins automatically.

• 

After selecting the Single user function, you can 

change the set temperature (24 °C to 30 °C in the 

Cool mode, 16 °C to 30 °C in the Heat mode), fan 

speed, and vertical air flow direction.

• 

When the Single user function is turned on in the 

Cool mode while the set temperature is set to lower 

than 24 °C, the set temperature is automatically 

raised to 24 °C. But if the set temperature is set to 

between 25 °C and 30 °C, it remains the same.

• 

Even after you turn off the Single user function, 

vertical air swing continues until you turn it off with 

the Vertical air swing (

) button.

• 

If you select the Single user while such function as 

2-Step cooling, Fast, Comfort, Quiet, or good'sleep 

are running, these modes are canc

elled.

• 

You can also start the Single user function by pressing 

the Options (

) button.

In the Cool or Heat mode

Select Single user.

13

 

Timed on/Timed off function

Use the Timed on/Timed off to turn on or off the air 
conditioner after the time that you set. 

(Select On or Off among On, Off, and 

.)

(Set the on/off time.)

• 

Press the 

 (Timer) button to change the 

current function between 

On

Off

, and 

 

(good’sleep). 

 (good’sleep) is displayed in the 

Cool and Heat mode only.

  NOTE

• 

Once you start the Timed on/off function, the Timer 

( ) indicator is displayed on the indoor unit display.

• 

You can set a time between 0.5 and 24 hours. Set 

the time interval to 0.0 to cancel the Timed on/off 

function.

• 

After starting the Timed on function, you can change 

the mode and the set temperature. You cannot 

change the set temperature while the Fan mode is 

running.

• 

You cannot set the same time for both of the Timed 

on and Timed off functions.

Combining Timed on and Timed off

When 

the air 

conditioner 

is off

Example) Timed on: 3 hours, Timed off: 

5 hours
The air conditioner turns on after 

3 hours from the moment you start 

Timed on/off, remains on for 2 hours, 

then turns off automatically.

When 

the air 

conditioner 

is on

Example) Timed on: 3 hours, Timed 

off: 1 hour

The air conditioner turns off after 1 hour 

from the moment you start Timed on/

off, then turns on after 2 hours from 

the moment it is turned off.

The smart energy-saving functions of the Samsung air conditioner reduce electricity consumption.

Summary of Contents for AR NXFP Series


























Reviews: