24
Troubleshooting
English
Cl
eaning and Maint
enanc
e
Problem
Solution
The remote control does
not work.
•
Replace the batteries in the remote control with new ones.
•
Make sure that nothing is blocking the remote control sensor.
•
Check whether there are strong lighting apparatus near the air conditioner.
Strong light which comes from fluorescent bulbs or neon signs may interrupt
the electric waves.
The Timed on/off function
does not work.
•
Check whether you pressed the SET button on the remote control after
setting the time.
The indicator blinks
continuously.
•
Press the Power button to turn off the air conditioner or disconnect the power
plug. If the indicator is still blinking, contact the service centre.
Odours permeate in the
room during operation.
•
Check whether the air conditioner is running in a smoky area. Ventilate the
room or operate the air conditioner in the Fan mode for 3 to 4 hours. (There
are no components used in the air conditioner that emit a strong odour.)
•
Check whether the drains are clean. Clean them regularly.
An error is indicated.
•
If the indoor unit indicator blinks, contact the nearest service centre. Be sure
to pass the error code to the service centre.
Noise is generated.
•
When refrigerant flow changes, noise may be generated, depending on the
status of the air conditioner. This is a normal operation.
Smoke is generated from
the outdoor unit.
•
If may not be a fire but it can be a steam generated from the outdoor heat
exchanger while the defrost function is running in the Heat mode in winter.
Water drops from the pipe
connections of the outdoor
unit.
•
Condensation may develop when the ambient temperature changes
excessively. This is a normal operation.
To perform its antimicrobial function this product has been treated with the biocide substance Silver zinc
zeolite.
