This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1 . Press the
Single user
button .
- (Single user) indicator will be displayed on the remote controller display . Then
will be displayed on the set temperature indicator part for few
seconds and Single user function will begin .
- When the Single user function is on, vertical air swing will turn on automatically .
- If the current set temperature is lower than 24°C in Cool mode, it will be
automatically raised to 24 °C .
Cancel
f
f
Press the
Single user
button once again .
•
Single user function is only available in Cool/Heat mode.
•
If the Single user function is selected while 2-Step Cooling/Fast/Comfort /
Quiet/
function is on, corresponding function will be cancelled .
•
Vertical air swing will remain on even after the Single user function is
cancelled.
•
Select or cancel the
Single user
function with the
Options
button .
- Press the
Options
button
press the
, or
Options
button to
make (Single user) indicator blink and press the
SET
button .
additional options available in Single user function
You can adjust the set temperature by 1 °C within the range of 24 °C ~ 30 °C in Cool mode and 16 °C ~ 30 °C
in Heat mode .
(Auto), (Low), (Med), (High), (Turbo) can be selected .
Vertical air swing can be selected .
using the Single user function
English-22
NA_GOOD_A3050_IB&IM_EN_DB68-05202A-02.indd 22
11/6/2015 2:33:02 PM
